होम
श्रेणियाँ
केस #003: बंद रोशनी
Logic Case Logic

केस #003: बंद रोशनी

वैज्ञानिक पद्धति
2 min
0 Solvers
231 Views
Only 5% of people solve this on the first try.

वैज्ञानिक पद्धति

बल्ब बंद है। आपने स्विच A को 10 मिनट तक चालू रखा, फिर बंद कर दिया। फिर स्विच B चालू किया और तुरंत दरवाजा खोला। बल्ब बंद है, लेकिन छूने पर बहुत गर्म है।

प्रयोग #42

बल्ब बंद लेकिन गर्म है, कौन सा स्विच इससे जुड़ा है?

सही!
स्विच A
स्विच A
पहला स्विच
"मैं 10 मिनट तक चालू था, फिर बंद कर दिया गया।"
सही!
स्विच B
स्विच B
दूसरा स्विच
"जब आप कमरे में हैं, मैं चालू हूँ।"
सही!
स्विच C
स्विच C
अनछुआ स्विच
"मुझे कभी नहीं छुआ गया।"

कार्रवाई

स्विच दबाएं

उस स्विच पर क्लिक करें जो आपको लगता है कि बल्ब से जुड़ा है।

How To

लॉजिकल परिणाम निर्धारित करने के लिए परिदृश्य (तापमान, स्थिति) के संकेतों का उपयोग करें। उस एकमात्र स्विच को चिह्नित करें जो सभी स्थितियों में फिट बैठता है।

Visuals provided by Unsplash

Share The Fun

Invite friends to take this challenge!

SHARE NOW

क्या आप जानते हैं?

गरमागरम बल्ब अपनी 95% ऊर्जा को गर्मी में बदल देते हैं।

यह पहेली अक्सर बड़ी टेक कंपनियों के इंटरव्यू में पूछी जाती है।

लॉजिक पहेलियाँ आपकी विजुअल स्टेट से आगे सोचने की क्षमता का परीक्षण करती हैं।

आधुनिक एलईडी बल्ब बहुत कम गर्मी पैदा करते हैं।

Which 'Switch' Turns On the Lightbulb? Puzzle (Logic) - Solve It in 3 Tries

You're standing in a room with three switches. Each switch controls one lightbulb in another room. You can't see the bulbs from where you are.

You can enter the bulb room only once. You can flip the switches as many times as you want before entering.

Your mission: Figure out exactly which switch controls which bulb. No guessing. No second chances.

This is the classic switch-lightbulb puzzle. It's been around for decades. And it still trips up smart people.

Let's see if you can crack it.

The Puzzle Setup

Here's exactly what you're dealing with.

Room 1 (Switch Room): Contains three switches — Switch A, Switch B, and Switch C.

Room 2 (Bulb Room): Contains three lightbulbs — Bulb 1, Bulb 2, and Bulb 3.

The Rule: You can flip switches as much as you want in Room 1. But you can enter Room 2 only once to check the bulbs.

The Goal: Match each switch to its correct bulb with 100% certainty.

You start with all switches off. All bulbs are off. No one is helping you. You're alone with your logic.

Think Before You Read the Solution

Seriously. Stop here. Think about it.

Most people try the obvious approach: Turn on one switch, enter the room, see which bulb is on. But that only identifies one switch. You still don't know the other two.

The puzzle is designed to frustrate. The solution is clever. Let's see if you can find it.

Take a minute. Or five. Think about heat. Think about time. Think about what lightbulbs do when they're on for a while.

The Solution: The Heat Trick

Ready? Here's how you solve it.

Step 1:

Turn on Switch A. Leave it on for 5-10 minutes.

Step 2:

Turn off Switch A. Turn on Switch B. Leave Switch B on.

Step 3:

Enter the bulb room. Look at the three bulbs.

Now Identify Each Bulb

Bulb State What It Means Which Switch
On (bright) Currently receiving power Switch B
Off but warm/hot Was on recently, now off Switch A
Off and cold Never turned on Switch C

Final Result:

  • Switch B controls the bulb that is ON
  • Switch A controls the bulb that is OFF but WARM
  • Switch C controls the bulb that is OFF and COLD

Why This Solution Works

The trick is heat. Incandescent lightbulbs get hot when they're on. They stay warm for a while after you turn them off.

By using time as a factor, you create three distinct states:

  • On = currently powered
  • Off but warm = was powered, now not
  • Off and cold = never powered

Three switches. Three distinct states. One visit. Problem solved.

What If You Have LED Bulbs?

Here's the catch: The classic solution works for incandescent bulbs. But what if you have LED bulbs?

LED bulbs don't get hot. They stay cool. The heat trick fails.

The LED Workaround

If you're dealing with LED bulbs, you need another approach. Here's one:

  • Turn on Switch A and Switch B. Leave them on for 30 seconds.
  • Turn off Switch B. Leave Switch A on.
  • Enter the room. The ON bulb is Switch A.
  • For the other two? You can't use heat. You'd need a different clue—like a dimmer switch or colored bulbs.

The classic puzzle assumes incandescent bulbs. Most versions do. If someone gives you this puzzle today, ask them: "Are these LED or incandescent?" It's the perfect trick question.

Variations of This Puzzle

The switch-lightbulb puzzle has many versions. Here are the most common.

Version 1: Two Switches, One Bulb

You have two switches and one bulb. You can enter once. Easy: Turn on Switch A, leave it on, enter. If bulb is on, it's Switch A. If off, it's Switch B.

Version 2: Three Switches, One Bulb

Same as classic but with one bulb. You can enter once. Solution: Turn on Switch A for 5 minutes. Turn it off. Turn on Switch B. Enter. If bulb is on, it's Switch B. If off but warm, it's Switch A. If off and cold, it's Switch C.

Version 3: Three Switches, Three Bulbs (But No Heat)

This version assumes LED bulbs. The classic solution fails. You need an alternative—like using a dimmer to create different brightness levels, or using smart bulbs that show colors.

Version 4: Four Switches, Four Bulbs

Now it gets complicated. With four switches, you need more states. Heat can give you On, Off-warm, and Off-cold. That's only three states. For four switches, you need another clue—like a bulb being slightly warm vs. very hot, or using time intervals to create different temperatures.

Why This Puzzle Is a Classic

This puzzle has been around for generations. It appears in job interviews. It's used in cognitive tests. It's a staple of puzzle books.

Why? Because it tests lateral thinking. The obvious solution—turning on one switch—only works for one bulb. To solve all three, you need to think beyond the obvious. You need to use properties of the bulb beyond just light.

It's also a perfect example of how constraints create creativity. The "one visit" rule forces you to find a clever workaround. Without that rule, the puzzle is trivial.

Frequently Asked Questions About the Switch Puzzle

Can I use a different method to solve this?

Yes. Some people use sound (bulbs sometimes hum), or touch (vibration). But heat is the most reliable and common method.

What if I don't have incandescent bulbs?

Then the classic solution fails. You'd need to use a different property—like using a timer to create different on/off patterns, or using bulbs with different colors.

Is there a solution for four switches?

Yes, but it's more complex. You can use heat levels (hot, warm, cold) plus on/off. Or you can use multiple visits. With a single visit, four switches require very precise heat differentiation.

How long should I leave the first switch on?

5-10 minutes. You want the bulb to get hot enough that it stays warm after you turn it off. Too short, and you won't notice the heat. Too long, and it might overheat.

Is this puzzle used in real interviews?

Yes. Some tech companies ask variations of this puzzle. It tests problem-solving and lateral thinking. It's also a common brain teaser in puzzle books.

Try These Similar Logic Puzzles

Puzzle: The Three Boxes (Again)

Three boxes. One has apples, one has oranges, one has both. All labels are wrong. You pick one fruit from one box. Which box is which?

Click for Answer

Pick from the box labeled "Both." Since all labels are wrong, this box has only apples or only oranges. Whatever fruit you pick, that's the only fruit in the box. Then swap the other labels accordingly.

Puzzle: The Two Ropes

You have two ropes. Each takes exactly 60 minutes to burn. They don't burn evenly. How do you measure 45 minutes?

Click for Answer

Light both ends of Rope A and one end of Rope B. When Rope A burns out (30 minutes), light the other end of Rope B. It will burn out in 15 minutes. Total: 45 minutes.

Final Thoughts: The Power of Lateral Thinking

The switch-lightbulb puzzle isn't about switches or bulbs. It's about thinking differently.

Most people focus on light. The solution uses heat. That's lateral thinking—finding an unexpected path to the answer.

This skill applies far beyond puzzles. It's how breakthroughs happen. It's how problems get solved. It's how you find answers that everyone else missed.

So the next time you face a problem, ask yourself: What am I not seeing? What property am I ignoring? What if I looked at it completely differently?

The answer is often right there. You just need to think outside the bulb.